Skip to main content

BBR · Commercial fit passport

Bike repair stand fit checker—eliminate the wrong stand before chasing “best”

A load rating does not tell you where the bicycle may be clamped, whether you can lift it, how much floor the tripod consumes, or whether a high-force job belongs in a portable stand. Build those records first; compare features second.

A focused decision path for this exact job. Verify fit and safety details against the current maker instructions.

A bicycle frame supported by an axle and bottom-bracket style repair stand
A support-by-axle/bottom-bracket stand makes the category split visible: not every bicycle should enter a tube clamp. Photo: Keithonearth / Thewalrus · CC BY-SA 3.0. Cropped by CSS; no product endorsement.

Interactive buying utility

Build a Repair Stand Fit check

The check eliminates stands whose published records do not fit the bike, support surface, loading method, floor, or job. A surviving record is not a “best” verdict: stability, clamp feel, durability, and real workshop use remain untested by this site.

1. What does the bicycle weigh in service state?
2. What exact clamp-safe support exists?
3. Can you control the manual lift?
4. How much level floor is clear while working?
5. What kind of work is planned?

Check incomplete

Answer all five gates

The result will show published specification matches, maximum-only holds, and every unresolved loading or task boundary.

Specification ledger

The table exposes source conflicts instead of silently choosing whichever number sells the product.

Six current candidates; three exact-range records, three deliberate holds

These are official and merchant records, not site measurements. A price or capacity match cannot establish stability, clamp feel, durability, finish protection, loading effort, or value.

CandidateObserved priceLoad recordClamp recordWorking heightOpen baseFolded / stand weightData status
Park Tool PCS-9.3$219.9580 lb maximum22–76 mm; 70 mm jaw height39–57 in36 × 36 × 48 in triangle42.5 × 14.25 × 10.25 in; 16 lbClear official record
Park Tool PCS-10.3$279.9580 lb maximum22–76 mm; 70 mm jaw height39–57 in36 × 36 × 48 in triangle43 × 14 × 10.25 in; 16 lbClear official record
Feedback Pro Mechanic HD$525Optimized to 70 lb; 100 lb maximumUp to 66 mm42–67 in55.5 in stance diameter6.8 × 8.6 × 45.4 in; 16.8 lbMaximum opening only—exact diameter held
Topeak PrepStand ProMerchant route unqualified55 lb maximum19–45 mm42–70 in53.1 in diameter46 × 7 in; 13.67 lbClear official record
Feedback Sport Mechanic 2.0$25085 lb maximum; “optimized” 35 and 45 lb both appear3 in opening, but one spec line says 1.9 in round tube41–66 in54 in diameter5 × 6.5 × 45 in; 12.4 lbRecord conflict—held from auto-match
Feedback Pro Mechanic$425Current official page says 85 lb; Jenson says 75 lbUp to 66 mm41.5–67 in46 in equilateral triangle5 × 8 × 45 in; 12.2 lbMerchant/maker conflict—held from auto-match

The load-rating trap

Maximum supported mass, normal working range, lifting method, and side load are four different records.

The heaviest rated stand can still be the wrong purchase

Capacity

Park requires the weight centered over the legs. Feedback’s HD maximum assumes level ground, the jaw over a tripod leg, and the bicycle’s center of gravity below the clamp. Those conditions belong beside the number.

Support

A 76 mm jaw opening does not grant permission to clamp a frame, carbon part, dropper stanchion, D-shaped post, dirty surface, short seat mast, cable route, or damaged tube.

Lift

A manual stand normally starts around 39–42 inches at the clamp. A 70 lb bicycle may fit a published load record while remaining unsafe or unrealistic for one person to load.

Task

Removing a wheel shifts balance. High torque, seized parts, impacts, long leverage, and force perpendicular to the stand can need wheels on the ground, a fixed support, or a qualified shop.

Sources and boundary

A buying filter—not a hands-on repair-stand review

This site did not own, assemble, load, clamp, fold, transport, torque against, or durability-test these stands. It did not inspect the visitor’s bicycle or authorize a support surface. The passport only compares current published records and deliberately holds conflicting data.